您好!坤电电工设备(东莞)有限公司专注各种型号的绞线机放线架单绞机研发和生产,产品多样,型号齐全,可支持定制设计专用设备!
产品分类Product Categories
坤电电工设备
高性能,高性价比

服务热线:
138 2698 7313
4
您的位置: 首页 ->  产品展示  -> 绞线机  -> 500P电脑触摸屏  -> 500P电脑触摸屏
500P电脑触摸屏

500P电脑触摸屏

 详情说明

机械型号:
Mechanical model
500P绞线机/strander
机器转数:
Number of machine revolutions
一,2500转RPM/5000扭/分  二,3000转RPM/6000扭/分
绞合限度:
Stranding limit
¢ 0.08七根以上铜线绞合 ¢ 0.08 stranded more than seven copper wires​
给线径:
Feed wire diameter
¢0.08-0.45
绞合面积:
Twisting pith
¢0.3-3.0平方毫米/¢ 0.3-3.0 square mm
绞合断面积:
Cross sectional area of strand
0.035-4MM
绞距:
Stranding distance
4.42-39.64-100
卷曲轴:
Roll crankshaft
¢300-400-500
主轴高度:
Spindle height
750MM
主机动力:
Main engine power
4KW/5.5HP正弦变频器与广东人民马达全铜/4kw / 5.5HP sine frequency converter and Guangdong people motor all copper
绞向:
Twist direction
自由选择向左或向右均可You can choose left or right freely
排线装置:
Wire arrangement device
轴承排线器,排距,排幅可任意调整/Bearing wire setter, row spacing, row width can be adjusted at will
刹车系统:
Brake system
电磁刹车外部断线时自动刹车或磁粉离合器张力控制器由机外设定(由客户选择)Automatic braking or magnetic powder clutch tension controller is set outside the machine when the external line of electromagnetic brake is broken (selected by the customer)
升降系统:
Lifting system
有手动油压或自动升降,由客户选择/There are manual oil pressure or automatic lifting, which are selected by customers
整机轴承:
Whole machine bearing
全进口SKF轴承或日本NSK轴承/All imported SKF Bearing or Japan NSK bearing
收线张力/自动张力:
Take up tension/automatic tension
绞线时,收线从盘底收到满盘时收线张力需不断增大,本机能自动跟踪调节收线张力;使整盘收线张力均匀一致,同时本机还能不停机调节张力。When the take-up is completed, the take-up tension needs to be continuously increased when the take-up is received from the bottom of the reel. This machine can automatically track and adjust the take-up tension, so that the take-up tension of the whole reel is even and consistent. At the same time, this machine can also adjust the tension without stopping the machine.​
自动停机:
Automatic shutdown
A、机内,机外断线自动停机;B、自动计米,到米自动停机A. Inside and outside the machine, the machine will stop automatically when the wire is broken; B. the machine will stop automatically when the meter is reached
设计:
Design
普通 或电脑触摸屏(由客户选择)Normal or computer touch screen (customer's choice)
噪音指数:
Noise index
约75分贝About 75 dB
机器尺寸:
Machine dimensions
L2650*W1295*H1200
净重:
Net weight
1750KG
坤电电工设备(东莞)有限公司 版权所有 【BMAP】【GMAP】技术支持:东莞网站建设
顾客服务中心:138 2698 7313/137 1302 5057 地址:广东省东莞市虎门镇怀德田心村马乡工业路8号 访问量:
*本站相关网页素材及相关资源均来源互联网,如有侵权请速告知,我们将在24小时内删除* [后台管理] 【百度统计粤ICP备2021059597号
404 Not Found

404 Not Found


nginx