您好!坤电电工设备(东莞)有限公司专注各种型号的绞线机放线架单绞机研发和生产,产品多样,型号齐全,可支持定制设计专用设备!
产品分类Product Categories
坤电电工设备
高性能,高性价比

服务热线:
138 2698 7313
4
400P自动张力电脑触摸

400P自动张力电脑触摸

 详情说明
机械型号:Mechanical model 400P绞线机/strander
机器转数:Number of machine revolutions 一,3000转RPM/6000扭/分  二,4000转RPM/8000扭/分
绞合限度:Stranding limit ¢ 0.08七根以上铜线绞合¢ 0.08 stranded more than seven copper wires
给线径:Feed wire diameter ¢0.08-0.45
绞合面积:Twisting pith ¢0.3-3.0平方毫米/¢ 0.3-3.0 square mm
绞合断面积:Cross sectional area of strand 0.035-4MM
绞距:Stranding distance 8.17-35.02
卷曲轴:Roll crankshaft ¢300-400
主轴高度:Spindle height 700MM
主机动力:Main engine power 4KW/5.5HP变频器与(西门子贝得或东莞马达全铜/4kw / 5.5HP sine frequency converter and Guangdong people motor all copper
绞向:Twist direction 自由选择向左或向右均可You can choose left or right freely
排线装置:Wire arrangement device 轴承排线器,排距,排幅可任意调整/Bearing wire setter, row spacing, row width can be adjusted at will
刹车系统:Brake system 电磁刹车外部断线时自动刹车或磁粉离合器张力控制器由机外设定(由客户选择)Automatic braking or magnetic powder clutch tension controller is set outside the machine when the external line of electromagnetic brake is broken (selected by the customer)
升降系统:Lifting system 有手动油压或自动升降,由客户选择/There are manual oil pressure or automatic lifting, which are selected by customers
整机轴承:Whole machine bearing 全进口SKF轴承或日本NSK轴承/All imported SKF Bearing or Japan NSK bearing
收线张力/自动张力:Take up tension / automatic tension: 绞线时,收线从盘底收到满盘时收线张力需不断增大,本机能自动跟踪调节收线张力;使整盘收线张力均匀一致,同时本机还能不停机调节张力。When the take-up is completed, the take-up tension needs to be continuously increased when the take-up is received from the bottom of the reel. This machine can automatically track and adjust the take-up tension, so that the take-up tension of the whole reel is even and consistent. At the same time, this machine can also adjust the tension without stopping the machine.
自动停机:Automatic shutdown A、机内,机外断线自动停机;B、自动计米,到米自动停机A. Inside and outside the machine, the machine will stop automatically when the wire is broken; B. the machine will stop automatically when the meter is reached
设计:Design 电脑触摸屏Computer touch screen
噪音指数:Noise index 约75分贝About 75 dB
机器尺寸:Machine dimensions L2570*W1250*H1062
净重:Net weight 1600KG


坤电电工设备(东莞)有限公司 版权所有 【BMAP】【GMAP】技术支持:东莞网站建设
顾客服务中心:138 2698 7313/137 1302 5057 地址:广东省东莞市虎门镇怀德田心村马乡工业路8号 访问量:
*本站相关网页素材及相关资源均来源互联网,如有侵权请速告知,我们将在24小时内删除* [后台管理] 【百度统计粤ICP备2021059597号
404 Not Found

404 Not Found


nginx